No recall records have been loaded for the Buell S1 Lightning yet.
Check your own car by VIN
Recalls apply to specific build ranges, so a recall listed here may or may not cover your particular vehicle. NHTSA's free VIN lookup is the authority: nhtsa.gov/recalls.
Transport Canada runs its own recall programme. Its campaigns do not always mirror the American ones, so a Canadian owner reading a US-only list is reading about a different car than the one on their driveway.
On certain motorcycles, the rear shock absorber eye could break. If the shock absorber eye should break, the underside of the vehicle will drag on the ground, which may adversely affect handling and could result in a crash without prior warning. Correction: Rear shock absorber will be replaced.
Certain motorcycles were built with a swingarm that could break. If this should occur, vehicle handling could be adversely affected which could lead to a vehicle crash without prior warning. Correction: Swingarm will be replaced on affected vehicles.
On certain motorcycles, the fuel tank valve assembly could become plugged. Under certain conditions this could cause the carburetor to overflow fuel which could result in a fire. This condition could also prevent sufficient fuel flow, which may cause the engine to misfire or stall. Either of these conditions could result in personal injury. In addition, certain M2 Cyclone models may have a component that could restrict airflow into the float bowl of the carburetor. This could cause the carburetor to overflow fuel which could result in a fire. This could also prevent sufficient fuel flow which may cause engine misfire or stalling. Correction: Fuel tank vent valve assembly will be replaced. M2 Cyclone models will have the float bowl assembly inspected for proper venting and have the condition corrected if necessary.
On certain motorcycles, the fuel tank mount system could, in the event of a collision, allow the fuel tank to become separated. Fuel tank separation could result in personal injury. Correction: Fuel tank mount system will be replaced.
On certain motorcycles, the side stand switch could become inoperative. This condition could cause the engine to stall or quit when riding which could result in a crash without prior warning. Correction: Side stand switch will be replaced.
Certain motorcycles were built with a negative battery cable that could break. This condition could cause the engine to stall or quit when riding which could result in a crash without prior warning. Correction: Negative battery cable will be inspected and replaced if necessary on affected vehicles.
On certain motorcycles, the rear shock absorber eye could break. If the shock absorber eye should break, the underside of the vehicle will drag on the ground, which may adversely affect handling and could result in a crash without prior warning. Correction: Rear shock absorber will be replaced.
Certain motorcycles were built with a swingarm that could break. If this should occur, vehicle handling could be adversely affected which could lead to a vehicle crash without prior warning. Correction: Swingarm will be replaced on affected vehicles.
On certain motorcycles, the fuel tank valve assembly could become plugged. Under certain conditions this could cause the carburetor to overflow fuel which could result in a fire. This condition could also prevent sufficient fuel flow, which may cause the engine to misfire or stall. Either of these conditions could result in personal injury. In addition, certain M2 Cyclone models may have a component that could restrict airflow into the float bowl of the carburetor. This could cause the carburetor to overflow fuel which could result in a fire. This could also prevent sufficient fuel flow which may cause engine misfire or stalling. Correction: Fuel tank vent valve assembly will be replaced. M2 Cyclone models will have the float bowl assembly inspected for proper venting and have the condition corrected if necessary.
On certain motorcycles, the fuel tank mount system could, in the event of a collision, allow the fuel tank to become separated. Fuel tank separation could result in personal injury. Correction: Fuel tank mount system will be replaced.
On certain motorcycles, the side stand switch could become inoperative. This condition could cause the engine to stall or quit when riding which could result in a crash without prior warning. Correction: Side stand switch will be replaced.
Certain motorcycles were built with a negative battery cable that could break. This condition could cause the engine to stall or quit when riding which could result in a crash without prior warning. Correction: Negative battery cable will be inspected and replaced if necessary on affected vehicles.
Certain motorcycles were built with an isolator mount system that could lose clamp load. Should this condition occur, it may allow the engine to move unexpectedly within the frame and cause unintended distraction to the operator, which could result in an accident. Correction: Front isolator system will be replaced on affected vehicles.
On certain motorcycles, the rear shock absorber eye could break. If the shock absorber eye should break, the underside of the vehicle will drag on the ground, which may adversely affect handling and could result in a crash without prior warning. Correction: Rear shock absorber will be replaced.
Certain motorcycles were built with a swingarm that could break. If this should occur, vehicle handling could be adversely affected which could lead to a vehicle crash without prior warning. Correction: Swingarm will be replaced on affected vehicles.
On certain motorcycles, the fuel tank valve assembly could become plugged. Under certain conditions this could cause the carburetor to overflow fuel which could result in a fire. This condition could also prevent sufficient fuel flow, which may cause the engine to misfire or stall. Either of these conditions could result in personal injury. In addition, certain M2 Cyclone models may have a component that could restrict airflow into the float bowl of the carburetor. This could cause the carburetor to overflow fuel which could result in a fire. This could also prevent sufficient fuel flow which may cause engine misfire or stalling. Correction: Fuel tank vent valve assembly will be replaced. M2 Cyclone models will have the float bowl assembly inspected for proper venting and have the condition corrected if necessary.
On certain motorcycles, the fuel tank mount system could, in the event of a collision, allow the fuel tank to become separated. Fuel tank separation could result in personal injury. Correction: Fuel tank mount system will be replaced.
On certain motorcycles, the side stand switch could become inoperative. This condition could cause the engine to stall or quit when riding which could result in a crash without prior warning. Correction: Side stand switch will be replaced.
Certain motorcycles were built with a negative battery cable that could break. This condition could cause the engine to stall or quit when riding which could result in a crash without prior warning. Correction: Negative battery cable will be inspected and replaced if necessary on affected vehicles.
Certain motorcycles were built with an isolator mount system that could lose clamp load. Should this condition occur, it may allow the engine to move unexpectedly within the frame and cause unintended distraction to the operator, which could result in an accident. Correction: Front isolator system will be replaced on affected vehicles.
Certain motorcyles do not comply with CMVSS 108 - Lighting System and Retroreflective Devices. Failure of one or more turn signal lamps would not be indicated to the operator of the vehicle by a noticeable change in the flashing rate of the turn signal indicator light. Correction: Turn signal flasher unit will be replaced.
Certain motorcyles do not comply with CMVSS 108 - Lighting System and Retroreflective Devices. Failure of one or more turn signal lamps would not be indicated to the operator of the vehicle by a noticeable change in the flashing rate of the turn signal indicator light. Correction: Turn signal flasher unit will be replaced.
Certain motorcyles do not comply with CMVSS 108 - Lighting System and Retroreflective Devices. Failure of one or more turn signal lamps would not be indicated to the operator of the vehicle by a noticeable change in the flashing rate of the turn signal indicator light. Correction: Turn signal flasher unit will be replaced.
On certain motorcycles, the drive pin(s) used on the front brake rotor could move out of position and come in contact with the front brake caliper. This condition could prevent the front wheel from rotating and result in a possible vehicle crash without prior warning. Correction: New drive pin kits will be installed on affected vehicles.
On certain motorcycles, the drive pin(s) used on the front brake rotor could move out of position and come in contact with the front brake caliper. This condition could prevent the front wheel from rotating and result in a possible vehicle crash without prior warning. Correction: New drive pin kits will be installed on affected vehicles.
Source: Transport Canada Vehicle Recalls Database.