No recall records have been loaded for the Buick Electra yet.
Check your own car by VIN
Recalls apply to specific build ranges, so a recall listed here may or may not cover your particular vehicle. NHTSA's free VIN lookup is the authority: nhtsa.gov/recalls.
Transport Canada runs its own recall programme. Its campaigns do not always mirror the American ones, so a Canadian owner reading a US-only list is reading about a different car than the one on their driveway.
A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL (BRACKET) MAY SLIP OUT OF PLACE RESULTING IN POSSIBLE INTERMITTENT INCREASES IN ENGINE SPEED OR DIESELING. THIS CONDITION COULD ALSO CAUSE THE SERVO ROD ASSEMBLY TO WEAR THROUGH THE BALL AND CATCH ON OTHER COMPONENTS POSSIBLY RESULTING IN A STUCK THROTTLE. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A POSSIBLE CRASH. CORRECTION: A BUSHING KIT WILL BE INSTALLED ON THE CRUISE CONTROL SERVO BAIL.
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1105-EVAPORATIVE EMISSIONS. VEHICLES MAY EXPERIENCE AN INOPERATIVE CANISTER PURGE THERMO VACUUM SWITCH.
EXCESSIVE ACCELERATOR CABLE FRICTION MAY RESTRICT THE CABLE'S FREE MOVEMENT BETWEEN THE ACCELERATOR PEDAL AND THE THROTTLE BODY. THIS COULD PREVENT THE THROTTLE FROM RETURNING TO IDLE WHEN THE ACCELERATOR PEDAL IS RELEASED AND POSSIBLY RESULT IN LOSS OF ACCELERATOR CONTROL AND A VEHICLE CRASH WITHOUT PRIOR WARNING. CORRECTION: VEHICLES WILL BE INSPECTED AND ACCELERATOR CONTROL CABLE WILL BE REPLACED IF REQUIRED.
ON VEHICLES WITH ANTILOCK BRAKES,BRAKE FLUID MAY SEEP FROM THE ABS PRESSURE/WARNING SWITCH,EVENTUALLY LEADING TO THE LOSS OF THE HYDRAULIC PUMP MOTOR.ALSO THE PUMP MOTOR AND ABS ELECTRICAL RELAYS MAY HAVE BEEN CONTAMINATED DURING ASSEMBLY.THIS CAN CAUSE LOSS OF THE HYDRAULIC PUMP MOTOR &/OR THE ABS FUNCTION.LOSS OF THE PUMP MOTOR WOULD EVENTUALLY LEAD TO LOSS OF THE REAR BRAKES & LOSS OF POWER ASSIST TO THE FRONT BRAKES.THIS WOULD RESULT IN INCREASED STOPPING DISTANCE.AN INOPERATIVE ABS RELAY COULD CAUSE LOSS OF THE ABS FUNCTION.ABS,PUMP MOTOR RELAYS,& 30 AMP FUSES WILL BE REPLACED.
ON VEHICLES WITH ANTILOCK BRAKES,BRAKE FLUID MAY SEEP FROM THE ABS PRESSURE/WARNING SWITCH,EVENTUALLY LEADING TO THE LOSS OF THE HYDRAULIC PUMP MOTOR.ALSO THE PUMP MOTOR AND ABS ELECTRICAL RELAYS MAY HAVE BEEN CONTAMINATED DURING ASSEMBLY.THIS CAN CAUSE LOSS OF THE HYDRAULIC PUMP MOTOR &/OR THE ABS FUNCTION.LOSS OF THE PUMP MOTOR WOULD EVENTUALLY LEAD TO LOSS OF THE REAR BRAKES & LOSS OF POWER ASSIST TO THE FRONT BRAKES.THIS WOULD RESULT IN INCREASED STOPPING DISTANCE.AN INOPERATIVE ABS RELAY COULD CAUSE LOSS OF THE ABS FUNCTION.ABS,PUMP MOTOR RELAYS,& 30 AMP FUSES WILL BE REPLACED.
THESE VEHICLES MAY HAVE INSUFFICIENT CLEARANCE BETWEEN THE POWER STEERING PUMP RETURN HOSE AND THE EXHAUST MANIFOLD DUE TO INCORRECT ROUTING. THIS CONDITION COULD CAUSE OVERHEATING OF THE HOSE, RESULTING IN A FLUID LEAK. THIS COULD RESULT IN AN ENGINE COMPARTMENT FIRE WITHOUT PRIOR WARNING. CORRECTION: POWER STEERING PUMP HOSE WILL BE REPLACED IF IT WAS INCORRECTLY ROUTED.
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S.1101-EMISSION DEVICE.
VEHICLES MAY HAVE BEEN ASSEMBLED WITH A RUBBER FUEL RETURN HOSE WHICH COULD ALLOW A SLOW FUEL LEAK WHILE THE ENGINE IS RUNNING. UNDER CERTAIN CONDITIONS THIS COULD RESULT IN A FIRE WHICH COULD SPREAD TO THE PASSENGER COMPARTMENT AND CAUSE BURN UNJURIES TO OCCUPANTS.
Source: Transport Canada Vehicle Recalls Database.