Label
The abbreviation "TYPE PC/VT" on the Compliance Label, as required under Section 6 (1)(f), was recorded in error as "Passenger Car".
Suzuki Swift recalls
No recall records have been loaded for the Suzuki Swift yet.
Check your own car by VIN
Recalls apply to specific build ranges, so a recall listed here may or may not cover your particular vehicle. NHTSA's free VIN lookup is the authority: nhtsa.gov/recalls.
Suzuki Swift recalls in Canada
Transport Canada runs its own recall programme. Its campaigns do not always mirror the American ones, so a Canadian owner reading a US-only list is reading about a different car than the one on their driveway.
Label
The abbreviation "TYPE PC/VT" on the Compliance Label, as required under Section 6 (1)(f), was recorded in error as "Passenger Car".
Powertrain
On certain vehicles, the automatic transmission shift lever appears to be in PARK, but can easily be moved from the PARK position without the use of the key, transmission lever detent button or depressing the brake. If the shift lever were to come our of PARK while the vehicle is parked on a non-level surface, a roll away could occur with the possibility of a crash without prior warning. Correction: Shifter assembly will be replaced.
Structure
Note: Vehicles originally retailed in Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland. The secondary hood latch on these vehicle can corrode and may experience an wither partial or full seizure condition. This could result in hood fly up while driving if the primary latch is not properly locked. Correction: Latch mechanism will be inspected and lubricated and an underhood maintenance label will be installed.
Structure
Note: Vehicles originally retailed in Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland. The secondary hood latch on these vehicle can corrode and may experience an wither partial or full seizure condition. This could result in hood fly up while driving if the primary latch is not properly locked. Correction: Latch mechanism will be inspected and lubricated and an underhood maintenance label will be installed.
Structure
Note: Vehicles originally retailed in Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland. The secondary hood latch on these vehicle can corrode and may experience an wither partial or full seizure condition. This could result in hood fly up while driving if the primary latch is not properly locked. Correction: Latch mechanism will be inspected and lubricated and an underhood maintenance label will be installed.
Structure
Note: Vehicles originally retailed in Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland. The secondary hood latch on these vehicle can corrode and may experience an wither partial or full seizure condition. This could result in hood fly up while driving if the primary latch is not properly locked. Correction: Latch mechanism will be inspected and lubricated and an underhood maintenance label will be installed.
Structure
Note: Vehicles originally retailed in Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland. The secondary hood latch on these vehicle can corrode and may experience an wither partial or full seizure condition. This could result in hood fly up while driving if the primary latch is not properly locked. Correction: Latch mechanism will be inspected and lubricated and an underhood maintenance label will be installed.
Seats And Restraints
THE (Takata) ABS PLASTIC FRONT SEAT BELT RELEASE BUTTONS ON THESE VEHICLES MAY BREAK ALLOWING PLASTIC PIECES TO FALL INTO THE BUCKLE ASSEMBLY. IF THIS SHOULD HAPPEN, A NO LATCH, FALSE LATCH OR FAILURE TO UNLATCH CONDITION COULD OCCUR CREATING THE RISK OF PERSONAL INJURY IN THE EVENT OF A CRASH OR SUDDEN STOP. CORRECTION: FRONT SEAT BELT BUCKLES WILL BE REPAIRED OR REPLACED AS NECESSARY.
Seats And Restraints
THE (Takata) ABS PLASTIC FRONT SEAT BELT RELEASE BUTTONS ON THESE VEHICLES MAY BREAK ALLOWING PLASTIC PIECES TO FALL INTO THE BUCKLE ASSEMBLY. IF THIS SHOULD HAPPEN, A NO LATCH, FALSE LATCH OR FAILURE TO UNLATCH CONDITION COULD OCCUR CREATING THE RISK OF PERSONAL INJURY IN THE EVENT OF A CRASH OR SUDDEN STOP. CORRECTION: FRONT SEAT BELT BUCKLES WILL BE REPAIRED OR REPLACED AS NECESSARY.
Seats And Restraints
THE (Takata) ABS PLASTIC FRONT SEAT BELT RELEASE BUTTONS ON THESE VEHICLES MAY BREAK ALLOWING PLASTIC PIECES TO FALL INTO THE BUCKLE ASSEMBLY. IF THIS SHOULD HAPPEN, A NO LATCH, FALSE LATCH OR FAILURE TO UNLATCH CONDITION COULD OCCUR CREATING THE RISK OF PERSONAL INJURY IN THE EVENT OF A CRASH OR SUDDEN STOP. CORRECTION: FRONT SEAT BELT BUCKLES WILL BE REPAIRED OR REPLACED AS NECESSARY.
Structure
CRACKS ON THE INNER HOOD PANEL MAY LEAD TO A CONDITION IN WHICH THE HOOD STRIKER ASSEMBLY DOES NOT PROPERLY ENGAGE THE HOOD LATCH WHEN CLOSED. THIS COULD POTENTIALLY RESULT IN HOOD "FLY-UP" WHILE THE VEHICLE IS IN MOTION. CORRECTION: DEALERS WILL INSTALL TWO (2) BOLTS AND NUTS TO BETTER SECURE THE STRIKER TO THE HOOD INNER PANEL. DEALERS WILL ALSO ENSURE THAT THE THREE (3) EXISTING HOOD LATCH ASSEMBLY RETAINING BOLTS ARE PROPERLY TORQUED.
Structure
CRACKS ON THE INNER HOOD PANEL MAY LEAD TO A CONDITION IN WHICH THE HOOD STRIKER ASSEMBLY DOES NOT PROPERLY ENGAGE THE HOOD LATCH WHEN CLOSED. THIS COULD POTENTIALLY RESULT IN HOOD "FLY-UP" WHILE THE VEHICLE IS IN MOTION. CORRECTION: DEALERS WILL INSTALL TWO (2) BOLTS AND NUTS TO BETTER SECURE THE STRIKER TO THE HOOD INNER PANEL. DEALERS WILL ALSO ENSURE THAT THE THREE (3) EXISTING HOOD LATCH ASSEMBLY RETAINING BOLTS ARE PROPERLY TORQUED.
Structure
CRACKS ON THE INNER HOOD PANEL MAY LEAD TO A CONDITION IN WHICH THE HOOD STRIKER ASSEMBLY DOES NOT PROPERLY ENGAGE THE HOOD LATCH WHEN CLOSED. THIS COULD POTENTIALLY RESULT IN HOOD "FLY-UP" WHILE THE VEHICLE IS IN MOTION. CORRECTION: DEALERS WILL INSTALL TWO (2) BOLTS AND NUTS TO BETTER SECURE THE STRIKER TO THE HOOD INNER PANEL. DEALERS WILL ALSO ENSURE THAT THE THREE (3) EXISTING HOOD LATCH ASSEMBLY RETAINING BOLTS ARE PROPERLY TORQUED.
Structure
CRACKS ON THE INNER HOOD PANEL MAY LEAD TO A CONDITION IN WHICH THE HOOD STRIKER ASSEMBLY DOES NOT PROPERLY ENGAGE THE HOOD LATCH WHEN CLOSED. THIS COULD POTENTIALLY RESULT IN HOOD "FLY-UP" WHILE THE VEHICLE IS IN MOTION. CORRECTION: DEALERS WILL INSTALL TWO (2) BOLTS AND NUTS TO BETTER SECURE THE STRIKER TO THE HOOD INNER PANEL. DEALERS WILL ALSO ENSURE THAT THE THREE (3) EXISTING HOOD LATCH ASSEMBLY RETAINING BOLTS ARE PROPERLY TORQUED.
Source: Transport Canada Vehicle Recalls Database.