2005 Freightliner Columbia problems

Daimler Trucks North America Recalls

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely sub...

RACK AND PINION FAILURE

A CONSUMER COMPLAINT WAS FILED WITH THE AGENCY ON AUGUST 22, 2009, BY AN INDEPENDENT CONTRACTOR LEASING A 2009 FREIGHTLINER CASCADIA.THE COMPLAINT ALLEGES THAT IN APRIL OF 2009 AT APPROXIMATELY 50,000 MILES HE EXPERIENCED A SEAL RUPTURE IN THE RACK AND PINION ASSEMBLY.A NEW SEAL WAS INSTALLED AND AT 56,000 MILES HE FOUND HIS RIGHT STEER TIRE COMPLETELY BALD.THE REPAIR SHOP IDENTIFIED AN INTERNAL FAILURE OF THE RACK AND PINION ASSEMBLY CAUSING THE RAPID WEAR OF THE TIRE.ODI HAS IDENTIFIED EWR FIELD REPORTS RELATED TO FAILED RACK AND PINIONS ON THE SUBJECT VEHICLES.THE REPORTS IDENTIFY EITHER AN...

STEERING COLUMN WELD CRACKS

AS A RESULT OF THE ODI INVESTIGATION, FREIGHTLINER HAS AGREED TO RECALL (NUMBER 07V-289) ALL OF THE VEHICLES MANUFACTURED WITH STEERING COLUMNS POTENTIALLY MISSING WELDS.THE RECALL REMEDY WILL INVOLVE INSPECTING THE RECALLED VEHICLES FOR MISSING WELDS AND IF FOUND REPLACE THE STEERING COLUMN.EARLY WARNING AGGREGATE DATA SUBMITTED TO NHTSA BY FREIGHTLINER SUGGESTED THAT A STEERING PROBLEM (EWR CODE 01) EXISTED FOR THE 2004 AND 2005 CENTURY AND COLUMBIA CLASS VEHICLES.THE COUNT OF FIELD REPORTS SUBMITTED FOR THE FIRST QUARTER OF 2006 WAS HIGHER THAN THE AVERAGE OF THE PREVIOUS 6 QUARTERS FOR THE...

STEERING COLUMN WELD CRACKS

EARLY WARNING AGGREGATE DATA SUBMITTED TO NHTSA BY FREIGHTLINER SUGGESTS THAT A STEERING (EWR CODE 01) PROBLEM EXISTS FOR THE 2004 AND 2005 CENTURY AND COLUMBIA CLASS VEHICLES.THE COUNT OF FIELD REPORTS SUBMITTED FOR THE FIRST QUARTER OF 2006 WAS SIGNIFICANTLY HIGHER THAN THE AVERAGE OF THE PREVIOUS 6 QUARTERS FOR THE AGGREGATE STEERING DATA.FURTHER REVIEW OF THE EWR DATA FOUNDFIELD REPORTS THAT DESCRIBED STEERING COLUMN FAILURES AS A RESULT OF WELDS CRACKING OR BREAKING.INFORMATION RECEIVED FROM FREIGHTLINER DETAILS A NUMBER OF STEERING COLUMNFAILURES ON THE SUBJECT VEHICLES.THESE FAILURES WE...

SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK

Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Risk: An insufficient air reservoir volume may reduce brake effectiveness, increasing the risk of crash.

EQUIPMENT

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

STEERING:RACK AND PINION

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2005-2011 FREIGHTLINER CASCADIA, COLUMBIA, CENTURY, CORONADO, AND CLASSIC XL TRUCKS MANUFACTURED FROM NOVEMBER 1, 2004, THROUGH JUNE 15, 2010 FOR THE RACK AND PINION STEERING SYSTEM. THE LOWER PINION BEARING MAY CORRODE AND FAIL. A FAILED BEARING MAY LEAD TO DAMAGE OF THE SPOOL VALVE SEALS. A DAMAGE SPOOL VALVE SEAL MAY ALLOW HYDRAULIC FLUID TO FLOW TO THE RIGHT OR LEFT TURN PORT INSTEAD OF FLOWING TO THE RETURN PORT.

Risk: THE STEERING COULD UNEXPECTEDLY TURN LEFT OR RIGHT, MAKING THE VEHICLE MORE DIFFICULT TO CONTROL AND INCREASING THE RISK OF A CRASH.

FUEL SYSTEM, DIESEL

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2004 THROUGH 2008 HEAVY TRUCKS MANUFACTURED FROM JULY 11, 2003, THROUGH SEPTEMBER 28, 2007, EQUIPPED WITH EPA04 MODEL MBE4000 ENGINES BUILT WITH PLASTIC LOW PRESSURE FUEL LINES AND FUEL FILTERS MOUNTED NEAR THE CENTER OF THE ENGINE ON THE LEFT-HAND SIDE. THE PLASTIC LOW PRESSURE FUEL LINE BETWEEN ENGINE MOUNTED FUEL FILTER AND ENGINE BLOCK MAY DEVELOP A SUBSTANTIAL DIESEL FUEL LEAK.

Risk: THIS COULD CREATE A ROAD HAZARD INCREASING THE RISK OF A CRASH. FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.

ENGINE AND ENGINE COOLING

DAIMLER TRUCKS IS RECALLING MODEL YEAR 2004-2010 TRUCKS EQUIPPED WITH CATERPILLAR C15 ENGINE. THE VARIABLE VALVE ACTUATION OIL LINE MAY RUB AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK.

Risk: AN OIL LEAK MAY RESULT IN A FIRE.

FUEL SYSTEM, DIESEL

DAIMLER TRUCKS IS RECALLING 62,000 MY 2005-2007 FREIGHTLINER BUSINESS CLASS, CENTURY CLASS, COLUMBIA, CORONADO, FLD, CLASSIC, STERLING A-LINE, L-LINE, AND WESTERN STAR 4900 TRUCKS. A FRACTURED FUEL LINE COULD LEAK DIESEL FUEL.

Risk: IF A LEAK CONTINUES UNDETECTED UNDER CERTAIN CONDITIONS, FUEL MAY IGNITE AT A HOT ENGINE SURFACE AND/OR FUEL MAY BE SPILLED ON THE ROAD SURFACE.

STEERING:LINKAGES:TIE ROD ASSEMBLY

ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE BALL SOCKET ASSEMBLY AT THE INNER END OF THE DRIVER SIDE TIE ROD MAY BE DAMAGED IN A SHARP TURN. EXCESSIVE TIE ROD ANGLES MAY LOOSEN THE TIE ROD IN THE BALL SOCKET OR DAMAGE THE THREADED TIE ROD SOCKET ATTACHMENT TO THE STEERING RACK ON THE DRIVER SIDE. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE.

Risk: A FRACTURED TIE ROD ASSEMBLY WILL MAKE THE VEHICLE MORE DIFFICULT TO CONTROL AT HIGHER SPEEDS AND A CRASH MAY OCCUR.

STEERING:LINKAGES:TIE ROD ASSEMBLY

ON CERTAIN TRUCKS EQUIPPED WITH RACK AND PINION STEERING, THE TIE ROD ARMS MAY HAVE BEEN INCORRECTLY INSTALLED. THE THREADED END OF THE BALL SOCKET ASSEMBLY MAY FRACTURE AND SEPARATE.

Risk: A FRACTURED TIE ROD ASSEMBLY WILL MAKE THE VEHICLE MORE DIFFICULT TO CONTROL AT HIGHER SPEEDS AND A CRASH MAY OCCUR.

Brakes

Issue: Certain trucks were built with air reservoir tanks that are too small in relation to the size of the air brake chambers. Canadian regulations require enough air reservoir capacity to ensure the brakes work even with heavy use or when there is a partial loss of the air system. Safety Risk: Reduced braking could cause extended stopping distances and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their truck to a Daimler Trucks North America authorized service facility to modify the truck to ensure it meets Canadian regulations.

Steering

On certain trucks equipped with a rack & pinion steering system, the lower pinion bearing may corrode and fail. As a result, the vehicle may require additional steering input while driving in a straight line. This could also cause a loss of steering power assist. These issues could ultimately result in property damage and/or personal injury. Correction: Dealers will inspect the rack and pinion gear assembly. If it passes the inspection, new bellows will be installed and grease added to the bottom pinion bearing. A steering gear that fails the inspection will be replaced.

Fuel System

On certain trucks, the plastic low-pressure fuel line between the engine-mounted fuel filter and the engine block may develop a diesel fuel leak. The location of the leak is unlikely to result in a vehicle fire; however, diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. This could ultimately result in a vehicle crash causing property damage and/or personal injury. Correction: Dealers will replace the plastic low-pressure fuel line with a steel version.

Engine

On certain vehicles equipped with a Caterpillar C15 engine, the Variable Valve Actuation (VVA) oil line may wear against the P-clip retaining the oil line. An oil leak could result in a vehicle fire causing property damage and/or personal injury. Correction: Caterpillar dealers will replace the VVA oil line with an updated version.

Steering

On certain trucks, the left inner tie rod end may loosen and eventually separate from the steering rack. Tie rod failure could result in a loss of steering control and a crash, causing personal injury or death. Correction: Dealers will remove and inspect the left inner tie rod. Damaged steering racks will be replaced.

Fuel System

On certain trucks, the high-pressure fuel line at each injector may fatigue and fracture if a fastener at the end of the line is not properly connected. This would allow high pressure atomized diesel fuel to enter the engine compartment, creating a risk of fire, which could result in property damage, personal injury, or death. Correction: Dealers will affect repairs.

Steering

On certain trucks, the tie rod arms may have been incorrectly installed during vehicle assembly. If the right steering arm is installed on the left knuckle, excessive tie rod angles may loosen the threaded tie rod attachment to the steering rack. As a result, the tie rod assembly may fail, possibly causing a loss of vehicle control and a crash. Correction: Dealers will inspect for proper steering arm installation. Steering components will be replaced on trucks that have incorrectly installed tie rod arms.

Steering

On certain trucks, the driver's side inner tie rod may be damaged while the truck is executing a sharp turn. Excessive tie rod angles may loosen the tie rod ball socket and/or damage the threaded tie rod attachment to the steering rack. As a result, the tie rod assembly may fail, possibly causing a loss of vehicle control and a crash. Correction: Dealers will replace the front axle steering stops to limit turning radius and prevent interference with the tie rod assembly.